Amica is glossy, guick drying solvent-
free self-leveling floor coating. It is suitable
for the protection and decoration both
interior and exterior concrete surfaces with
hard film and high mechanical strength. It
has excellent resistant to chemi-resistance
allows Amica to be use as floor coatings.
Suitable for various industries
especially in places such as production line
of textile mills, bottling plants, electronic
plants, paper mills, plastic plants, car park
and driveways, schools, warehouse and
storage facilities, garage, showroom and etc.
- New surface
Surface should be dry, clean and free
dirt, rust, etc. Remove completely all dirt,
grease, oil, water or other contaminants from
substrate. If the concrete is new it should be
left cured and dried at least 28 day before
- Painted Surface
For repainting on chalky or loose
peeling surface, the surface must be
scrubbed and cleaned with water. Remove
all loose and peeling paint. Roughen all
glossy surfaces with sandpaper for better
inter coat adhesion.
- The paint should be mixed thoroughly
according to the mixing ratio 4 parts of
Comp A : 1 part of Comp B by volume.
Apply by roller or brush. 2 coats of painting
is highly recommended. (Do not add thinner)
If add thinner, recommend less than 10% of
thinner. Wait till the first coat dried then
reapply the second coat. After every use
clean brush and tools well.